30 mm x 62 mm x 16 mm FAG 6206-2Z deep groove ball bearings

Nref:6,800 rpm; da min:71 mm; d:60 mm; da max:79.5 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; B:31 mm; Characteristic rolling element frequency, BSF:4.04 Hz; Static load, C0:52 kN; D1:111.2 mm; Mass:1.71 kg;

N:14mm; H:52.4 mm; Dz:95 mm; A1:35 mm; H1:18.4 mm; S:21.4 mm; d1:62 mm; Designation of bearing:EX209G2L4; Designation of open end cover:SCOE209-45; G:M6x1;

Lockwasher and Lockplates:MS 3096; Locknut:HM 3096; Weight:66.00 Kg; Thread G:Tr480x5; C11:77.00 mm; D3:560 mm; Appropriate Hydraulic Nut:HMV96; C:60 mm; d1:450.00 mm; L:200.00 mm;

L:150 mm; Z:91.3 mm; s1:32.55 mm; B:65.1 mm; Recommended tightening torque for set screw:16.8 Nm; A1:40 mm; A:70 mm; Designation of housing:PG212N-; C:52.5 kN; N:M16;

s1:57.6 mm; T max.:100 °C; L:224 mm; A2:44 mm; A1:26 mm; N2:70 mm; A:70 mm; Designation of housing:T213-; G:M6x1; L2:21 mm;

Da max:188 mm; d2:130.2 mm; Y0:2.07; Mass:9.13 kg; Max operating temperature, Tmax:200 °C; d:110 mm; Radial clearance class:C3; B:69.8 mm; Fatigue limit load, Cu:63.9 kN; b:10.5 mm;

R - Cone Backface To Clear Radius1:6.35 mm; r - Cup Backface To Clear Radius2:3.30 mm; Da - Cup Frontface Backing Diameter:334.30 mm; Cone Part Number:EE420812X; G1 - Heat Generation Factor (Roller-Raceway):1150.5; Cage Type:Stamped Steel; d:206.375 mm; Series:420000; Ca90 - Dynamic Thrust Rating (9

Number of Bearings:Double; Bearing I.D. d(mm):10; Bearing Retained:No; Volume Discount:Available; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Flange Shape:Compact Type; RoHS:6; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

s1:33.4 mm; H1:20 mm; T min.:-20 °C; B1:43.7 mm; d:45 mm; J:146 mm; N:17mm; A:70 mm; S:11 mm; A1:36 mm;

d:25; B:42.9; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Accessory:With cast iron cover; Fit:J7; Seal:Silicone; Bearing Unit, Type:Pillow Type; Surface Treatment:No;

D4:61 mm; T:2.5 mm; Thread D11:M50x1.5; Lockwasher:MB 10; Weight:0.15 Kg; s:6 mm; D3:70 mm; Bn:11 mm;

outer ring width:36 mm; cage material:High Strength Machin; Min operating temperature, Tmin:-40 °C; Nlim (grease):5,700 rpm; number of rows:1; Radial clearance class:C3; EAN:4547359120882; Dynamic load, C:137 kN; rs min:1.5 mm; da min:53 mm;

Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; Unit, Type:Bearing unit; Pillow Type, Category:Standard; Days to Ship:9 Days; Surface Treatment:No; Pillow Type, Category:Standard; Cover Type:Cast iron cover with; Rolling Element Material:Steel; d:55;

t:15 mm; Ro:G1/4; d1:340.00 mm; L1:206.00 mm; e:9.0 mm; b:26 mm; Appropriate Withdrawal Nut No.:HM3176; Thread D12:Tr380x5; Weight:22.70 Kg; L1:226 mm;

da min:103 mm; Dynamic load, C:315 kN; d:90 mm; Mass (without HJ ring):5.72 kg; Da max:177 mm; D:190 mm; Inventory:0.0; Characteristic outer ring frequency, BPF0:5.21 Hz; dc min:127 mm; Min operating temperature, Tmin:-20 °C;